AD8674ARZ-REEL7 OverviewA 14-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 75μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 14mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 4 channels on the operational amplifiers. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 3.5mA in this operational amplifier circuit.
AD8674ARZ-REEL7 Features14 Pins
supply voltage of 5V
135.56dB voltage gain
AD8674ARZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8674ARZ-REEL7 Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
Factory Lead Time | 10 Weeks |
Contact Plating | Tin |
Mounting Type | Surface Mount |
Package / Case | 14-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 14 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Pbfree Code | no |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 14 |
ECCN Code | EAR99 |
Packing Method | TAPE AND REEL |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 4 |
Supply Voltage | 5V |
Terminal Pitch | 1.27mm |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | AD8674 |
Pin Count | 14 |
Qualification Status | Not Qualified |
Power Supplies | +-5/+-15V |
Number of Channels | 4 |
Operating Supply Current | 14mA |
Quiescent Current | 3.5mA |
Supply Current-Max | 16.8mA |
Slew Rate | 4V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 120 dB |
Current - Input Bias | 3nA |
Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
Output Current per Channel | 20mA |
Input Offset Voltage (Vos) | 75μV |
Gain Bandwidth Product | 10MHz |
Neg Supply Voltage-Nom (Vsup) | -5V |
Unity Gain BW-Nom | 10000 kHz |
Voltage Gain | 135.56dB |
Power Supply Rejection Ratio (PSRR) | 130dB |
Low-Offset | YES |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 18V |
Voltage - Input Offset | 20μV |
Settling Time | 5.1 μs |
Low-Bias | NO |
Micropower | NO |
Bias Current-Max (IIB) @25C | 0.012μA |
Programmable Power | NO |
Input Capacitance | 6.25pF |
Neg Supply Voltage-Max (Vsup) | -18V |
Wideband | NO |
Input Voltage Noise Density | 2.8nV/sqrt Hz |
Length | 8.65mm |
Height Seated (Max) | 1.75mm |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |