THS4524IDBTR OverviewPackaged in a 38-TFSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. An op amp ic of the Differential type. The op amp is delivered to you in a Tape & Reel (TR) case. The pins on this board total to 38 in total. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. A total of 38 pins are present on the instrumentation amplifier. There is an input offset voltage of 240μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . As long as the supply current of the chip does not exceed 1.14mA, this op amp ic can operate. 119dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 4 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential, Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5V. For packing the buffer amplifier, the TR-axis is adopted. A total of 1 instrumentation amplifiers are present on the device.
THS4524IDBTR Features38 Pins
supply voltage of 3.3V
119dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4524IDBTR ApplicationsThere are a lot of Texas Instruments
THS4524IDBTR Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 38-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 38 |
| Weight | 124.000814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | THS4524 |
| Pin Count | 38 |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1.14mA |
| Nominal Supply Current | 1.14mA |
| Slew Rate | 600V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 700nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 55mA |
| Input Offset Voltage (Vos) | 240μV |
| Bandwidth | 95MHz |
| Unity Gain BW-Nom | 95000 kHz |
| Voltage Gain | 119dB |
| Average Bias Current-Max (IIB) | 0.9μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| -3db Bandwidth | 145MHz |
| Bias Current-Max (IIB) @25C | 0.9μA |
| Programmable Power | NO |
| Max I/O Voltage | 2mV |
| Number of Amplifiers | 1 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
THS4524IDBTR Datasheet
+8613715157867