AD5253BRU10-RL7 Overview20-TSSOP (0.173, 4.40mm Width) packages contain it.Non-Volatile marks the beginning of the storage process for this pentometer.The digital potentiometer has 4 embedded circuits.In the Tape & Reel (TR) package, it is accessible for securing the digital analogic.This pentometer is protected from overcurrent by 64 taps.The number of positions is 64.There are 20 terminations on this digital potentiometer.You can refer to 4 functions in this programmable potentiometer.According to the diagram, the speed potentiometers's total resistance is 10000Ohm.Powered by 2.5V, it delivers its performance.In the digi devices, there are 20 pins.Mounting in Surface Mount is recommended.It is capable of supplying a voltage of 2.7V~5.5V ±2.25V~2.75V volts.This digital potentiometer operates at 0°C.A flow limit of 10kOhm can be applied.A member of the family AD5253 pentometer belongs to.Mounted by Surface Mount.Digital potentiometer has 20 pins.Using this digital variable resistor, you will find Selectable Address.A supply voltage of 2.75V conducts the potentiometer.The potentiameter is capable of delivering voltage at 3/5V.With 400kHz, it is capable of maintaining high accuracy.The maximum supply current digital potentiometer can handle is 5μA.Quiescent current is consumed at 5μA.The maximum dual supply voltage for this pentometer should be 2.75V.Dual supply voltages up to 2.25V are used to ensure stable power.
AD5253BRU10-RL7 FeaturesAvailable in 20-TSSOP (0.173, 4.40mm Width) package
4 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
20 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA
AD5253BRU10-RL7 ApplicationsThere are a lot of Analog Devices Inc.
AD5253BRU10-RL7 Digital Potentiometers applications.
Cell phone
Household appliances
Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Tolerance | ±20% |
| JESD-609 Code | e0 |
| Feature | Selectable Address |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Temperature Coefficient | 300 ppm/°C |
| Resistance | 10kOhm |
| Number of Positions | 64 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Voltage - Supply | 2.7V~5.5V ±2.25V~2.75V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD5253 |
| Pin Count | 20 |
| Operating Supply Voltage | 2.75V |
| Power Supplies | 3/5V |
| Configuration | Potentiometer |
| Interface | I2C |
| Number of Circuits | 4 |
| Nominal Supply Current | 3μA |
| Memory Type | Non-Volatile |
| Max Supply Current | 5μA |
| Quiescent Current | 5μA |
| Bandwidth | 0.4 kHz |
| Taper | Linear |
| Max Dual Supply Voltage | 2.75V |
| Min Dual Supply Voltage | 2.25V |
| Dual Supply Voltage | 2.5V |
| Negative Supply Voltage-Nom | -2.5V |
| Number of Taps | 64 |
| Total Resistance | 10000Ohm |
| Resistance - Wiper (Ω) (Typ) | 200 |
| Temperature Coefficient (Typ) | 650ppm/°C |
| Length | 6.5mm |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
AD5253BRU10-RL7 Datasheet
+8613715157867