AD549KHZ OverviewPackaged in a TO-99-8 Metal Can case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Bulk case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. The mounting type that is recommended for this electrical part is Through Hole. In relation to the operating temperature of this buffer op amp, it works well at an average of 0°C~70°C . As long as the supply current of the chip does not exceed 700μA, this op amp ic can operate. Keeping the voltage gain at 120dB is the best course of action. As far as the device is concerned, buffer amplifier has 1 channels. As the name implies, Topgate™ refers to the series of the buffer op amp. Currently, linear amplifier is operating with a quiescent current of 700μA.
AD549KHZ Features8 Pins
supply voltage of 15V
120dB voltage gain
AD549KHZ ApplicationsThere are a lot of Analog Devices Inc.
AD549KHZ Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Bulk |
| Series | Topgate™ |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 500mW |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | AD549 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 700μA |
| Power Dissipation | 500mW |
| Quiescent Current | 700μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 0.075pA |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | YES |
| Dual Supply Voltage | 15V |
| Input Voltage Noise Density | 90nV/sqrt Hz |
| Height | 4.7mm |
| Length | 9.4mm |
| Width | 9.4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD549KHZ Datasheet
+8613715157867