AD5620BCPZ-1RL7 Overview
This package is included in the 8-WDFN, CSP package and is available for purchase. 3V volts power it. Using a Surface Mount connector, you can mount this FPGA module on the development board. An FPGA belonging to the nanoDAC® series is referred to as an FPGA. In order to ensure a safe and efficient operation, it is important to maintain a temperature within -40°C~105°C at all times. Using the Tape & Reel (TR) layout, this FPGA model can be contained in a very small amount of space. The total number of terminations is 8. Parts related to this part can be found using its base part number AD5620. The device is designed with 8 pins in total. It is possible for this FPGA to perform as per its specifications as long as it is mounted in Surface Mount direction. In the case of 3V supply voltage, designers can take full advantage of its flexibility. The device has a total of 8 pins on it. In addition, it is able to support a maximum supply voltage of 3.3V. The unit is capable of working with a minimum supply voltage of 2.7V.
AD5620BCPZ-1RL7 Features
8-WDFN, CSP package
8 pin count
8 pins
Minimal input voltage of 1.25V
nanoDAC® series

AD5620BCPZ-1RL7 Applications
There are a lot of Analog Devices Inc.
AD5620BCPZ-1RL7 Digital to Analog Converters (DAC) applications.

Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-WDFN, CSP
Number of Pins	8
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
Series	nanoDAC®
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Base Part Number	AD5620
Pin Count	8
Output Type	Voltage - Buffered
Operating Supply Voltage	3V
Polarity	Unipolar
Interface	SPI, Serial
Max Supply Voltage	3.3V
Min Supply Voltage	2.7V
Power Dissipation	5.5mW
Number of Bits	12
Max Output Voltage	5V
Min Input Voltage	1.25V
Slew Rate	1.5 V/μs
Architecture	String DAC
Max Input Voltage	2.5V
Converter Type	D/A CONVERTER
Reference Type	Internal
Data Interface	SPI, DSP
Differential Output	No
Resolution	1.5 B
Sampling Rate	125 ksps
Voltage - Supply, Analog	2.7V~3.3V
Min Output Voltage	0V
Voltage - Supply, Digital	2.7V~3.3V
Settling Time	10μs
Linearity Error-Max (EL)	0.0244%
Integral Nonlinearity (INL)	1 LSB
Input Bit Code	BINARY
Number of Converters	1
Conversion Rate	125 ksps
INL/DNL (LSB)	±1 (Max), ±0.25 (Max)
Differential Nonlinearity	0.25 LSB
Length	3mm
Width	3mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead