AD565ASD Overview
In the 24-CDIP (0.600, 15.24mm) package, you will find it. In order to operate it, a voltage supply of 15V volts is required. Through Hole-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -55°C~125°C when operating. Unlike other FPGA models, this one is contained in Tube for the sake of space saving. 24 terminations are present in total. You can find related parts by using the part number AD565A, which is its base part number. In order to make it work, 24 pins have been designed. In order for this FPGA to work properly in accordance with its specifications, it is necessary that it is mounted in Through Hole. With a total of 24 pins, it is equipped with a high level of security. It can accept a maximum voltage of 16.5V volts as a supply voltage. A minimal supply voltage of 11.4V is required for it to operate.
AD565ASD Features
24-CDIP (0.600, 15.24mm) package
24 pin count
24 pins
Minimal input voltage of 10.1V

AD565ASD Applications
There are a lot of Analog Devices Inc.
AD565ASD Digital to Analog Converters (DAC) applications.

Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point

Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Factory Lead Time	12 Weeks
Contact Plating	Lead, Tin
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	24-CDIP (0.600, 15.24mm)
Number of Pins	24
Operating Temperature	-55°C~125°C
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Terminal Finish	Tin/Lead (Sn/Pb)
Max Power Dissipation	345mW
Terminal Position	DUAL
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	2.54mm
Base Part Number	AD565A
Pin Count	24
Output Type	Current - Unbuffered
Polarity	Bipolar, Unipolar
Max Supply Voltage	16.5V
Min Supply Voltage	11.4V
Power Dissipation	225mW
Number of Bits	12
Max Output Voltage	0V
Min Input Voltage	10.1V
Architecture	R-2R
Max Input Voltage	1V
Converter Type	D/A CONVERTER
Reference Type	External, Internal
Data Interface	Parallel
Differential Output	No
Resolution	1.5 B
Sampling Rate	4 Msps
Voltage - Supply, Analog	±11.4V~16.5V
Min Output Voltage	0V
Settling Time	400ns
Max Dual Supply Voltage	16.5V
Integral Nonlinearity (INL)	0.75 LSB
Min Dual Supply Voltage	11.4V
Input Bit Code	BINARY, OFFSET BINARY
Dual Supply Voltage	12V
Number of Converters	1
INL/DNL (LSB)	±0.25, ±0.25
Negative Supply Voltage-Nom	-15V
Height Seated (Max)	5.72mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead