AD573JNZ OverviewThe analogue to digital converter is designed with 10 Bits.The AD converter is embedded in the 20-DIP (0.300, 7.62mm) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 20 pin count.The peak reflow temperature (Cel) amounts to NOT APPLICABLE to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Through Hole.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The input type of this electronic AD converter is Single Ended.There are Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is +4.5V~7V -12V~16.5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.It belongs to AD573 family.The supply/digital voltage of this electrical AD converter is +4.5V~7V -12V~16.5V.1 inputs are employed.The maximal analog input voltage of this electrical AD converter is 5V.The minimal analog input voltage of this electrical AD converter is -5V.
AD573JNZ Features1 Functions
20 basic kinds of terminations
20 pin count
AD573JNZ ApplicationsThere are a lot of Analog Devices Inc.
AD573JNZ ADC applications.
Digital Multimeters, PLC's (Programming Logic Controllers)
RADAR processing, digital oscilloscopes
CMOS Image sensors for mobile applications
Medical Instrumentation and medical imaging
Music recording
Digital signal processing
Scientific instruments
Rotary encoder
Displaying
Transducer
| Factory Lead Time | 8 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | AD573 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Configuration | S/H-ADC |
| Number of Bits | 10 |
| Input Type | Single Ended |
| Architecture | SAR |
| Number of Inputs | 1 |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION |
| Reference Type | Internal |
| Data Interface | Parallel |
| Sampling Rate | 0.05 MHz |
| Voltage - Supply, Analog | +4.5V~7V -12V~16.5V |
| Voltage - Supply, Digital | +4.5V~7V -12V~16.5V |
| Number of Analog In Channels | 1 |
| Output Bit Code | BINARY, OFFSET BINARY |
| Linearity Error-Max (EL) | 0.0977% |
| Sample and Hold / Track and Hold | SAMPLE |
| Ratio - S/H:ADC | 1:1 |
| Analog Input Voltage-Max | 5V |
| Negative Supply Voltage-Nom | -15V |
| Analog Input Voltage-Min | -5V |
| Conversion Time-Max | 30μs |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
AD573JNZ Datasheet
+8613715157867