AD603ARZ-REEL7 OverviewIt is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Variable Gain-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 100V for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. A supply current of 20mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 31.3dB. This op amp ic has 1 circuits. There are 2 elements in this buffer amplifier. Buffer op amp series numbers are indicated by the X-AMP®. It is important that the op amp resistance stays within the range of 103Ohm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT.
AD603ARZ-REEL7 Features8 Pins
supply voltage of 5V
31.3dB voltage gain
Resistance of 103Ohm
AD603ARZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD603ARZ-REEL7 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | X-AMP® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 103Ohm |
| Max Power Dissipation | 400mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD603 |
| Pin Count | 8 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6.3V |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 20mA |
| Power Dissipation | 400mW |
| Slew Rate | 275V/μs |
| Amplifier Type | Variable Gain |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 9.5V~12.6V ±4.75V~6.3V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 100V |
| Bandwidth | 90MHz |
| Gain Bandwidth Product | 90MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 31.3dB |
| Dual Supply Voltage | 5V |
| Noise Figure | 8.8 dB |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |