AD8031ARTZ-REEL7 OverviewIn the package, you will find a SC-74A, SOT-753-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Voltage Feedback-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 5 pins on it. Op amp rates 1.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 900μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 82dB for the time being. On the buffer amps, there are 1 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 5V. The linear amplifier is packaged by using a TR axis. The current is quiescent at 900μA.
AD8031ARTZ-REEL7 Features5 Pins
supply voltage of 5V
82dB voltage gain
Output Type: Rail-to-Rail
AD8031ARTZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8031ARTZ-REEL7 Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AD8031 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Operating Supply Current | 900μA |
| Nominal Supply Current | 900μA |
| Power Dissipation | 500mW |
| Output Current | 15mA |
| Quiescent Current | 900μA |
| Slew Rate | 35V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 450nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 15mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 80MHz |
| Gain Bandwidth Product | 40MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 80000 kHz |
| Voltage Gain | 82dB |
| Average Bias Current-Max (IIB) | 2μA |
| Power Supply Rejection Ratio (PSRR) | 86dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6.3V |
| Voltage - Input Offset | 1mV |
| Settling Time | 125 ns |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 2μA |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Input Capacitance | 1.6pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8031ARTZ-REEL7 Datasheet
+8613715157867