AD817ANZ Overview
There is a 8-DIP (0.300, 7.62mm) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electrical part should be mounted using type Through Hole. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 7.5mA . It is recommended to keep the voltage gain at 72.04dB at all times. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 28V. 7.5mA quiescent currents are flowing through buffer op amp. Using VIDEO AMPLIFIER, you can sort the electronic part based on the type of consumer IC that is included.
AD817ANZ Features
8 Pins
72.04dB voltage gain

AD817ANZ Applications
There are a lot of Analog Devices Inc.
AD817ANZ Instrumentational OP Amps applications.

Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation

Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Surface Mount	NO
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Position	DUAL
Number of Functions	1
Terminal Pitch	2.54mm
Base Part Number	AD817
Pin Count	8
Operating Supply Voltage	28V
Supply Voltage-Min (Vsup)	2.5V
Number of Channels	1
Operating Supply Current	7.5mA
Nominal Supply Current	7.5mA
Quiescent Current	7.5mA
Slew Rate	350V/μs
Amplifier Type	General Purpose
Common Mode Rejection Ratio	120 dB
Current - Input Bias	3.3μA
Voltage - Supply, Single/Dual (±)	5V~36V ±2.5V~18V
Output Current per Channel	50mA
Input Offset Voltage (Vos)	2mV
Bandwidth	50MHz
Voltage Gain	72.04dB
Power Supply Rejection Ratio (PSRR)	86dB
Voltage - Input Offset	500μV
Settling Time	45 ns
Dual Supply Voltage	9V
Input Capacitance	1.5pF
Consumer IC Type	VIDEO AMPLIFIER
Input Voltage Noise Density	15nV/sqrt Hz
Height	3.43mm
Length	9.27mm
Width	7.24mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead