AD824ARZ-14-REEL7 OverviewThere is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the J-FET-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 14h termination of the year. In total, there are 14 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. 14 pins are located on the operational amplifiers. The input offset voltage is 2.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 2.5mA . It is recommended to keep the voltage gain at 120dB at all times. On the buffer amps, there are 4 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. This linear amplifier pack is based on the TAPE AND REEL axis. 625μA quiescent currents are flowing through buffer op amp.
AD824ARZ-14-REEL7 Features14 Pins
supply voltage of 15V
120dB voltage gain
Output Type: Rail-to-Rail
AD824ARZ-14-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD824ARZ-14-REEL7 Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 5/+-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 2.7mA |
| Slew Rate | 2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 4pA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 12mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 500μV |
| Settling Time | 6 μs |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.000035μA |
| Input Capacitance | 3.3pF |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Voltage Noise Density | 16nV/sqrt Hz |
| Length | 8.65mm |
| Height Seated (Max) | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD824ARZ-14-REEL7 Datasheet
+8613715157867