AD8426ACPZ-WP OverviewA 16-VQFN, CSP case is used to package the op amp. Instrumentation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tray case. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 350μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. 800MOhm should be the range of resistance for the linear amplifier.
AD8426ACPZ-WP Features16 Pins
supply voltage of 15V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 800MOhm
AD8426ACPZ-WP ApplicationsThere are a lot of Analog Devices Inc.
AD8426ACPZ-WP Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 800MOhm |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AD8426 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 350μA |
| Slew Rate | 0.6V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 110 dB |
| Current - Input Bias | 20nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.35V~18V |
| Output Current per Channel | 13mA |
| Input Offset Voltage (Vos) | 5μV |
| Bandwidth | 1MHz |
| Gain Bandwidth Product | 1MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 60dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 200μV |
| -3db Bandwidth | 1MHz |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.0015μA |
| Voltage Gain-Nom | 10 |
| Non-linearity-Max | 0.075% |
| Height | 950μm |
| Length | 4.1mm |
| Width | 4.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
AD8426ACPZ-WP Datasheet
+8613715157867