ADA4096-2ARMZ OverviewPackaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 300μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 120μA, this op amp ic can operate. 111dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Currently, linear amplifier is operating with a quiescent current of 60μA.
ADA4096-2ARMZ Features8 Pins
supply voltage of 5V
111dB voltage gain
Output Type: Rail-to-Rail
ADA4096-2ARMZ ApplicationsThere are a lot of Analog Devices Inc.
ADA4096-2ARMZ Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Factory Lead Time | 20 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ADA4096 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Power Supplies | +-1.5/+-15V |
| Number of Channels | 2 |
| Operating Supply Current | 120μA |
| Quiescent Current | 60μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 77 dB |
| Current - Input Bias | 3nA |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 501 kHz |
| Gain Bandwidth Product | 786kHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 595 kHz |
| Voltage Gain | 111dB |
| Average Bias Current-Max (IIB) | 0.019μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 35μV |
| Micropower | YES |
| -3db Bandwidth | 152kHz |
| Bias Current-Max (IIB) @25C | 0.015μA |
| Input Capacitance | 7pF |
| Input Voltage Noise Density | 27nV/sqrt Hz |
| Height | 950μm |
| Length | 3.2mm |
| Width | 3.2mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4096-2ARMZ Datasheet
+8613715157867