ADA4817-1ARDZ OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) Exposed Pad case which makes it easy for the consumer to handle. Op amps are Voltage Feedback types of amplifier on the chip. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 5V. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 2mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~105°C . You can run this op amp ic on 21mA . Op amp is a member of the 63dB's 63dB family. Instrumentation amplifier has 1 channels on it. This buffer amplifier is assigned within the FastFET™ series by its manufacturer. Linear amplifier has a quiescent current of 21mA.
ADA4817-1ARDZ Features8 Pins
supply voltage of 5V
63dB voltage gain
ADA4817-1ARDZ ApplicationsThere are a lot of Analog Devices Inc.
ADA4817-1ARDZ Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tube |
| Series | FastFET™ |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4817 |
| Pin Count | 8 |
| Number of Channels | 1 |
| Operating Supply Current | 21mA |
| Nominal Supply Current | 21mA |
| Output Current | 70mA |
| Quiescent Current | 21mA |
| Slew Rate | 870V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | -90 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 1.05 GHz |
| Gain Bandwidth Product | 410MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 410000 kHz |
| Voltage Gain | 63dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Power Supply Rejection Ratio (PSRR) | -72dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 400μV |
| Settling Time | 9 ns |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.00002μA |
| Programmable Power | NO |
| Dual Supply Voltage | 3V |
| Input Capacitance | 1.5pF |
| Height | 900μm |
| Length | 3.25mm |
| Width | 3.25mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4817-1ARDZ Datasheet
+8613715157867