ADA4891-2ARMZ-R7 OverviewA 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 3V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 10mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 8.8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 5V. The instrumentation amplifier is packed in the form of TAPE AND REEL. There is a quiescent current of 4.4mA in this operational amplifier circuit.
ADA4891-2ARMZ-R7 Features8 Pins
supply voltage of 3V
83dB voltage gain
Output Type: Rail-to-Rail
ADA4891-2ARMZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4891-2ARMZ-R7 Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADA4891 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Operating Supply Current | 8.8mA |
| Nominal Supply Current | 8.8mA |
| Output Current | 125mA |
| Quiescent Current | 4.4mA |
| Slew Rate | 210V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 88 dB |
| Current - Input Bias | 2pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Output Current per Channel | 125mA |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 220MHz |
| Gain Bandwidth Product | 105MHz |
| Unity Gain BW-Nom | 240000 kHz |
| Voltage Gain | 83dB |
| Average Bias Current-Max (IIB) | 0.00005μA |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 2.5mV |
| Settling Time | 28 ns |
| Low-Bias | YES |
| Micropower | NO |
| -3db Bandwidth | 240MHz |
| Bias Current-Max (IIB) @25C | 0.00005μA |
| Programmable Power | NO |
| Input Capacitance | 3.2pF |
| Length | 3mm |
| Height Seated (Max) | 1.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4891-2ARMZ-R7 Datasheet
+8613715157867