ADF4110BCPZ-RL7 OverviewAs a clock IC, it is packaged by the Tape & Reel (TR) method. The 20-WFQFN Exposed Pad, CSP package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 20 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. RF synthesizers based on this clock provide frequencies up to 550MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There should be 2.7V~5.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. Microprocessor-specific clock PLL with 20 bits. The related electronic parts of part number ADF4110 are listed below. There are 20 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 5V as the supply voltage. 6-BIT SWALLOW COUNTER is included in this frequency generator to enhance clock signal output. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. For its full function, a supply current of 4.5mA is required. There should be a maximum supply current of 5.5mA for this time clock generator.
ADF4110BCPZ-RL7 FeaturesAvailable in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4110BCPZ-RL7 ApplicationsThere are a lot of Analog Devices Inc.
ADF4110BCPZ-RL7 Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4110 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Frequency (Max) | 550MHz |
| Supply Current-Max (Isup) | 5.5mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4110BCPZ-RL7 Datasheet
+8613715157867