ADF4350BCPZ OverviewClock ICs are packaged using the Tray method. In the 32-WFQFN Exposed Pad, CSP package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 32 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in Clock logic that can be used with this clock generator. It is possible to classify this electronic component as a Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF). An IC that generates clocks specifically for microprocessors, this clock PLL is 32-bits in si32e. The related electrical components for the base part number ADF4350 can be found below. A 32 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. The output frequency is magnified as high as possible with 4 signal outputs. By operating at a frequency of 4.4GHz, frequency generator is able to achieve high efficiency. Time clock generator requires a supply current of 110mA to fully function. During this clock generator operation, a maximum current of 110mA is supplied.
ADF4350BCPZ FeaturesAvailable in the 32-WFQFN Exposed Pad, CSP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ADF4350BCPZ ApplicationsThere are a lot of Analog Devices Inc.
ADF4350BCPZ Clock Generators applications.
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad, CSP |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Fanout Distribution, Fractional N, Integer N, Clock/Frequency Synthesizer (RF) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 4.4GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4350 |
| Output | Clock |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI |
| Number of Circuits | 1 |
| Operating Supply Current | 110mA |
| Nominal Supply Current | 110mA |
| Max Supply Current | 110mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4350BCPZ Datasheet
+8613715157867