ADSP-BF518BSWZ-4F4 OverviewIt is a kind of electronic component that comes in a package of 176-LQFP Exposed Pad.Packaging is provided in the form of Tray.In addition to meeting a wide range of requirements, it is a member of Fixed Point.The machine is mounted in the way of Surface Mount in order to facilitate its operation.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.It refers to the analog voltage range of 1.8V 2.5V 3.3V that may be input or output.Digital signal processors such as this one are included in the Blackfin® series.The configuration of this board includes 176 pins.The base part number ADSP-BF518 allows identification of a wide range of related parts.Specifically, the device is designed to operate at a frequency of 400MHz.Devices like this can be powered with as little as 1.14V volts.It is capable of receiving a maximum voltage of 1.47V.There is a memory on this device that can store 1MB data.Data format and transmission speed can be configured for asynchronous serial communication on 2 UART channels.To measure time and count events externally, 8 timers/counters are used.The processor core uses the architecture of the Blackfin processor.A 40 I/O interface is present on the device.FLASH is its memory type.A lower operating temperature than 85°C is recommended.Over -40°C should be the operating temperature.Upon opening the device, there are 32 pieces of information stored.Keeping the frequency below 400MHz will ensure reliability.Embedded systems in this system use 2 SPI channels for short-distance communication.2 I2C channels are used to communicate between more ICs.The 8 PWM channels control analog circuits digitally.The 2 Ethernet channels facilitate communication between different types of network cables.
ADSP-BF518BSWZ-4F4 FeaturesSupplied in the 176-LQFP Exposed Pad package
8 timers/counters
40 I/Os
ADSP-BF518BSWZ-4F4 ApplicationsThere are a lot of Analog Devices Inc.
ADSP-BF518BSWZ-4F4 DSP applications.
Sonar
Voice recognition
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Supplier Device Package | 176-LQFP-EP (24x24) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Fixed Point |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 400MHz |
| Base Part Number | ADSP-BF518 |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 1MB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | FLASH |
| Number of Bits | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 8 |
| Density | 4 Mb |
| Core Architecture | Blackfin |
| Max Frequency | 400MHz |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Non-Volatile Memory | FLASH (4Mbit) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 116kB |
| Number of SPI Channels | 2 |
| Clock Rate | 400MHz |
| Number of Ethernet Channels | 2 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF518BSWZ-4F4 Datasheet
+8613715157867