AM1802BZWTD3 OverviewShipping overseas is convenient thanks to the embedded microprocessor's packaging in 361-LFBGA. High reliability is achieved using advanced packaging method Tray. 1 Core 32-Bit cores/Bus width are present in the CPU. Identify the operating temperature around -40°C~90°C TJ. In the Sitara™ series, it is found. The CPU is cored by a processor with a number of 0 cores. A total of LPDDR, DDR2 RAM controllers are used by this CPU. The microprocessor features interfaces I2C, McASP, SPI, MMC/SD, UART for better service. At 1.8V 3.3V, the CPU runs its I/O. A MICROCONTROLLER, RISC represents the uPs/uCs/Peripheral ICs type. Search AM1802 for variants of the embedded microprocessor. In total, 361 terminations have been made. Using a 1.2V voltage supply, the microprocessor should turn on and run. It is an architecture with 32 bits. CPUs operate with a frequency of 300MHz Hz. You can refer to the datasheets for the functions of 361 pins. It is important to note that there is 32b bandwidth available for data transfer. An injection of 361 pins is performed inside the body of the micro processor. 1 cores are present in this processor. This CPU is widely used in many applications because of its Surface Mount mount. It is 1.32V on the CPU's core. In general, RAM (Random-Access Memory) is designed with a 8kB of 0MB. normally, the microprocessor should not receive a voltage higher than 1.2V. The lowest voltage that should be applied to the micro processor is 950mV. A CPU program transfers data by using 144 I/Os. A CPU is equipped with a 16kB sized memory. Counters 4 indicate how busy the CPU is. It features 3 UART (Universal Asynchro3us Receiver/Transmitter) channels
AM1802BZWTD3 FeaturesARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
8kB RAM
144 I/Os
AM1802BZWTD3 ApplicationsThere are a lot of Texas Instruments
AM1802BZWTD3 Microprocessor applications.
Television
Heater/Fan
Calculator
Kindle
Christmas lights
3D printers
Washing machine
Microwave ovens
Home appliances
Home video and audio
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Operating Temperature | -40°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Base Part Number | AM1802 |
| Pin Count | 361 |
| Voltage | 1.32V |
| Max Supply Voltage | 1.2V |
| Min Supply Voltage | 950mV |
| Memory Size | 16kB |
| Number of I/O | 144 |
| RAM Size | 8kB |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Bit Size | 32 |
| Has ADC | NO |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 3 |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| ROM Programmability | FLASH |
| Number of Cores | 1 |
| Display & Interface Controllers | LCD |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
+8613715157867