AMC1200BDUBR OverviewIn the package, you will find a 8-SMD, Gull Wing-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Isolation-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 200μV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~105°C , which is a good operating temperature. Using an 5.4mA supply current, this operational amplifier ics can be operated. Buffer amplifier produces Differential signals, which is one of its many benefits. 1 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5V. The linear amplifier is packaged by using a TR axis.
AMC1200BDUBR Features8 Pins
supply voltage of 5V
Output Type: Differential
AMC1200BDUBR ApplicationsThere are a lot of Texas Instruments
AMC1200BDUBR Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD, Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Max Power Dissipation | 44mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AMC1200 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5.5V |
| Number of Elements | 1 |
| Operating Supply Current | 5.4mA |
| Nominal Supply Current | 5.4mA |
| Power Dissipation | 44mW |
| Output Current | 20mA |
| Amplifier Type | Isolation |
| Common Mode Rejection Ratio | 95 dB |
| Max Input Voltage | 320mV |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 100 kHz |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Supply Voltage Limit-Max | 6V |
| Power Consumption | 82.5mW |
| -3db Bandwidth | 0.1MHz |
| Dual Supply Voltage | 5V |
| Non-linearity-Max | 0.075% |
| Height | 4.85mm |
| Length | 9.5mm |
| Width | 6.57mm |
| Thickness | 3.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867