CC-9C-V212-NC-25 Overview
MPU Core is the type of module or board that is used in this microcontroller.Microprocessor chip is powered by a processor with a total of ARM926EJ-S, NS9360 cores in it.It is default for the microcontroller to set the mode to -40°C~85°C.There is a flash size 4MB on the MCU electronics.In this case, the connector type is SO-DIMM-144.There are two versions of this microcontrollers in the ConnectCore® Series.This is done to make sure that the software is able to run normally and that the RAM size is reduced to 16MB.In this MCU chip, the speed is set to 155MHz.For as long as microprocessor continues to operate accurately at the 155MHz frequency, microprocessor will continue to function correctly.The package has the Module extension.As of right now, 85°C is the maximum operational temperature at this time.Microprocessor should be warmer than -40°C when microprocessor is operating.In the program, there is a structure called ARM.
CC-9C-V212-NC-25 Features
Core processor of ARM926EJ-S, NS9360
Flash size of 4MB
Speed of 155MHz
Core architecture of ARM

CC-9C-V212-NC-25 Applications
There are a lot of Digi
CC-9C-V212-NC-25 Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel
Home and Building Automation
Thermostat

Package / Case	Module
Operating Temperature	-40°C~85°C
Series	ConnectCore®
Size / Dimension	3.59 x 2.06 91.2mmx52.2mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	SO-DIMM-144
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Frequency	155MHz
Interface	Ethernet, I2C
Speed	155MHz
RAM Size	16MB
Core Processor	ARM926EJ-S, NS9360
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	4MB
RoHS Status	RoHS Compliant
Lead Free	Lead Free