CD4541BMTG4 OverviewThe timer clock is enclosed in a packaging that is attached to the 14-SOIC (0.154, 3.90mm Width). Set the frequency of the timer to 100kHz.It is used to pack in Tape & Reel (TR) case. Mounting type Surface Mount is recommended.It is possible to provide a voltage of 3V~20V by using the programmable timer.The type of chips can be divided into Programmable Timer. The operating temperature of this timer clock is -55°C~125°C. To mount this digital timer with Surface Mount. It is based on CD4541. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The number of the chip's terminations sums up to 14. The timer clock has 129.387224mg in weight. The timer clock runs quiescent current at 100μA.
CD4541BMTG4 FeaturesOperate frequency at 100kHz
Package / Case: Tape & Reel (TR)
Mounting Type:Surface Mount
Quiescent Current at 100μA
CD4541BMTG4 ApplicationsThere are a lot of Texas Instruments
CD4541BMTG4 Programmable Timers & Oscillators applications.
Electric Vehicles
Always On Systems
Clutch Actuator circuit
Car Door Handle circuit
Smart Key
Remote current sensor
Intruder Detection
Power-On Reset Timer
Long Time One Shot
“Heartbeat” Timers
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Programmable Timer |
| Packing Method | TR |
| Max Power Dissipation | 100mW |
| Voltage - Supply | 3V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CD4541 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 3V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 300μA |
| Power Dissipation | 100mW |
| Number of Bits | 1 |
| Propagation Delay | 10 μs |
| Quiescent Current | 100μA |
| Turn On Delay Time | 18 μs |
| Max I(ol) | 0.004 A |
| High Level Output Current | -12.6mA |
| Low Level Output Current | 12.6mA |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.3mA |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Count | 65536 |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867