CDC2510CPWR OverviewClock generator is packaged in the way of Cut Tape (CT). Clock PLL is embedded in the 24-TSSOP (0.173, 4.40mm Width) package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 24 terminations can be found in frequency generators. The supply voltage of 3.3V allows for high efficiency. Clock is designed for clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. PLL clock is mounted in the way of Surface Mount. The maximal supply voltage (Vsup) reaches 3.6V. The supply voltage (Vsup) should be kept above 3V for normal operation. Clock generators should operate with the voltage supply of 3V~3.6V. The temperature should be set at 0°C~85°C to ensure reliable performance. This electronic component can be classified into PLL Clock Driver. Clock PLL is equipped with 24 pin count. According to the base part number, its related parts can be founded. Clock generator is designed with 24 pins. The supply voltage should be maintained at 3.3V for high efficiency. Clock PLL is configured with 10 output. The maximal same edge skew (tskwd) can not be exceeded. It is able to realize high efficiency when operating at a frequency of 125MHz. Time clock generator is capable of delivering a load capacitance of 30pF. Phase locked loop is well suited for TR based on PLL's reliable performance.
CDC2510CPWR FeaturesAvailable in the 24-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 30pF
CDC2510CPWR ApplicationsThere are a lot of Texas Instruments
CDC2510CPWR Clock Generators applications.
Wireless infrastructure
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 125MHz |
| Base Part Number | CDC2510 |
| Pin Count | 24 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 30pF |
| Nominal Supply Current | 10μA |
| Power Dissipation | 700mW |
| Quiescent Current | 10μA |
| Output Characteristics | SERIES-RESISTOR |
| Input | Clock |
| Ratio - Input:Output | 1:10 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867