CDC2536DBR OverviewThe Tape & Reel (TR) method is used for packaging clock ICs. As part of the 28-SSOP (0.209, 5.30mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 28 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. The Surface Mount allows the electrical component to be installed conveniently on the panel. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. It has been classified as a PLL Clock Driver electronic part, which means that it is a semiconductor. It is a 28-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CDC2536. There are 28 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. 6 signal outputs are provided for enhancing output frequency as much as possible. Low timing skew is offered by this RF synthesizer at maximum 0.5 ns. Using a frequency of 100MHz allows frequency synthesizer to achieve high efficiencies. This clock generator ic is ideal for the TR package that comes with it.
CDC2536DBR FeaturesAvailable in the 28-SSOP (0.209, 5.30mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC2536DBR ApplicationsThere are a lot of Texas Instruments
CDC2536DBR Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Weight | 208.397344mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 100MHz |
| Base Part Number | CDC2536 |
| Pin Count | 28 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 2mA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 1:6 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Height | 2mm |
| Length | 10.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867