CDC706PW OverviewAs a clock IC, it uses the Tube package. 20-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 20 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVCMOS, Crystal as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. Providing a maximum frequency of 300MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVCMOS logic levels. This is an electronic part that can be classified as a PLL Frequency Synthesizer in this case. In particular, this clock PLL is designed to be used with microprocessors. CDC706 is the base part number for finding related electronic parts. There is a 20 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. 6 signal outputs allow for maximi6ation of output frequency. At a frequency of 200MHz, the system can achieve high efficiency. An efficient 3-element frequency generator with low jitter performance is being offered here.
CDC706PW FeaturesAvailable in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC706PW ApplicationsThere are a lot of Texas Instruments
CDC706PW Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PLL Frequency Synthesizer |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 200MHz |
| Base Part Number | CDC706 |
| Output | LVCMOS |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Interface | I2C |
| Number of Circuits | 1 |
| Nominal Supply Current | 90mA |
| Frequency (Max) | 300MHz |
| Input | LVCMOS, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 8MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | Yes/Yes |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867