CDCVF2505IDRQ1 OverviewAs a clock IC, it is packaged by the Tape & Reel (TR) method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 8 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVTTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.6V. A maximum voltage of 3V should be used for this frequency generator for safety reasons. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. Microprocessor-specific clock PLL with 8 bits. The related electronic parts of part number CDCVF2505 are listed below. There are 8 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. There is an electronic part in this series that belongs to the Automotive, AEC-Q100 family. The output frequency can be magnified as high as possible with the assistance of 4 signal outputs. In this case, we are referring to the load capacitance which is 25pF. It is perfect for this clock generator ic to use the TR package.
CDCVF2505IDRQ1 FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
Load capacitance of 25pF
CDCVF2505IDRQ1 ApplicationsThere are a lot of Texas Instruments
CDCVF2505IDRQ1 Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | PLL Clock Driver |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | CDCVF2505 |
| Pin Count | 8 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Load Capacitance | 25pF |
| Frequency (Max) | 200MHz |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Input | LVTTL |
| Ratio - Input:Output | 1:5 |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867