CS2000P-CZZ OverviewAs a clock IC, it is packaged by the Tube method. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of NOT SPECIFIED during reflowing. As you can see, it consists of 10 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.5V. There should be 3.1V~3.5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -10°C~70°C. As far as this electronic part is concerned, it can be classified as a Fractional N Synthesizer component. Microprocessor-specific clock PLL with 10 bits. The related electronic parts of part number CS2000P are listed below. There are 10 pins that are available on the frequency generator. Time clock generator can handle a voltage of 3.3V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 2 signal outputs. High efficiency is achieved when operating at a frequency of 75MHz.
CS2000P-CZZ FeaturesAvailable in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CS2000P-CZZ ApplicationsThere are a lot of Cirrus Logic Inc.
CS2000P-CZZ Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
| Factory Lead Time | 20 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Type | Fractional N Synthesizer |
| Voltage - Supply | 3.1V~3.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 75MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CS2000P |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.5V |
| Number of Circuits | 1 |
| Input | Clock |
| Ratio - Input:Output | 2:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Input Current | 10mA |
| Divider/Multiplier | Yes/Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |