CS2300CP-CZZ OverviewTube-method packaging is used for clock ICs. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of NOT SPECIFIED during reflowing. It contains 10 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be Clock. To access the full performance of the electronic component, 1 circuits are implemented. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.5V. As far as the supply voltage is concerned, clock PLL can be used with 3.1V~3.5V. Based on the test statistics, an ambient temperature of -10°C~70°C should be set. This electronic component is usually classified as a Fanout Distribution, Fractional N Synthesizer component. The clock-generating IC is a 10-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CS2300CP. It is possible to connect to the frequency generators via 10 pins. 2 signal outputs enable clock PLL to magnify output frequency as high as possible. At a frequency of 75MHz, frequency generator is capable of achieving high efficiency. This frequency synthesizer operates at a maximum current of 10mA.
CS2300CP-CZZ FeaturesAvailable in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
CS2300CP-CZZ ApplicationsThere are a lot of Cirrus Logic Inc.
CS2300CP-CZZ Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Factory Lead Time | 20 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -10°C~70°C |
| Packaging | Tube |
| Published | 2007 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| Type | Fanout Distribution, Fractional N Synthesizer |
| Max Power Dissipation | 76mW |
| Voltage - Supply | 3.1V~3.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 75MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CS2300CP |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.5V |
| Power Supplies | 3.3V |
| Interface | I2C, SPI, Serial |
| Number of Circuits | 1 |
| Nominal Supply Current | 18mA |
| Max Supply Current | 10mA |
| Input | Clock |
| Ratio - Input:Output | 1:2 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Input Current | 10mA |
| Divider/Multiplier | Yes/Yes |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
CS2300CP-CZZ Datasheet
+8613715157867