CY220501KFZXI OverviewThe 16-TSSOP (0.173, 4.40mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 16 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVTTL, Crystal. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 150MHz 166.6MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 2.5V 3.3V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with CMOS logic levels. This electronic component is usually classified as a Clock Generator, Fanout Distribution component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY22050. It is possible to connect to the frequency generators via 16 pins. This clock PLL features CAN ALSO OPERATE AT 2.5V SUPPLY for better clock signal output.
CY220501KFZXI FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
CY220501KFZXI ApplicationsThere are a lot of Cypress Semiconductor Corp
CY220501KFZXI Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Published | 1999 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE AT 2.5V SUPPLY |
| Voltage - Supply | 2.5V 3.3V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY22050 |
| Output | CMOS |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 2.5/3.33.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 150MHz 166.6MHz |
| Input | LVCMOS, LVTTL, Crystal |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 133MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |