CY2305CSXC-1HT OverviewClock ICs are packaged using the Tape & Reel (TR) method. In the 8-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 8 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVCMOS, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.33MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.6V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. There are 3V~3.6V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 8-bits in si8e. The related electrical components for the base part number CY2305 can be found below. A 8 pin is available on the PLL. Time clock generator is capable of handling a voltage of 3.3V. The output frequency is magnified as high as possible with 5 signal outputs. The timing skew of this frequency synthesizer is low at 0.2 nsmax.
CY2305CSXC-1HT FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305CSXC-1HT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY2305CSXC-1HT Clock Generators applications.
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 6 Weeks |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold, Tin |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Operating Temperature | -40°C~85°C |
| JESD-609 Code | e3 |
| Packaging | Tray |
| Pbfree Code | yes |
| Part Status | Active |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Modulator |
| Number of Terminations | 8 |
| Voltage - Supply | 2.85V~5.25V 4.75V~5.25V |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Position | QUAD |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Voltage - Supply | 3V~3.6V |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Supply Voltage | 3.3V |
| Base Part Number | AD7724 |
| Pin Count | 48 |
| Base Part Number | CY2305 |
| Qualification Status | Not Qualified |
| Output | LVCMOS |
| Operating Supply Voltage | 5V |
| Pin Count | 8 |
| Polarity | Bipolar, Unipolar |
| Number of Outputs | 5 |
| Power Dissipation | 300mW |
| Number of Bits | 1 |
| Operating Supply Voltage | 3.3V |
| Min Input Voltage | 2.32V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Max Input Voltage | 2.68V |
| Supply Voltage-Min (Vsup) | 3V |
| Supply Type | Analog, Digital |
| Number of Circuits | 1 |
| Data Interface | Serial |
| Nominal Supply Current | 32mA |
| Sampling Rate | 30 Msps |
| Number of Analog In Channels | 2 |
| Frequency (Max) | 133.33MHz |
| Sampling Rate (Per Second) | 250k |
| Input | LVCMOS, LVTTL |
| Output Bit Code | BINARY |
| Ratio - Input:Output | 1:5 |
| Power Consumption | 300mW |
| PLL | Yes |
| Linearity Error-Max (EL) | 0.003% |
| Differential - Input:Output | No/No |
| Sample and Hold / Track and Hold | SAMPLE |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Input Capacitance | 2pF |
| RoHS Status | ROHS3 Compliant |
| Voltage Supply Source | Analog Digital |
| Lead Free | Lead Free |
| Resolution (Bits) | 15 b |
| Number of Analog Inputs | 2 |
| Length | 7mm |
| Height Seated (Max) | 1.6mm |
| Width | 7mm |
| Lead Free | Contains Lead |