CY2305SXC-1T OverviewIt is packaged using the Tape & Reel (TR) method since it is a clock IC. Embedded in the 8-SOIC (0.154, 3.90mm Width) package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. It contains a total of 8 terminations within RF synthesizer. This clock generator ic should receive a voltage of 3.3V. It is designed that the Clock PLL's input should be Clock. A total of 1 circuits are implemented to access the full performance of the electrical part. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. There should be a voltage supply above 3V for this frequency generator in order to ensure its safety. As long as you provide 3V~3.6V supply voltage, it will work. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. In this IC, a 8-bit frequency generator is designed specifically for use in microprocessors. This part number is related to its related electronic parts. There are a number of 8 pins that are available on the clock generators. There is a maximum supply voltage of 3.3V that frequency generators can handle. 5 signal outputs maximi5e the output frequency. At 133.33MHz, frequency synthesizer achieves high efficiency. When this RF synthesizer is operated at its maximum current, it will supply 32mA.
CY2305SXC-1T FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY2305SXC-1T ApplicationsThere are a lot of Cypress Semiconductor Corp
CY2305SXC-1T Clock Generators applications.
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.33MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY2305 |
| Pin Count | 8 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 32mA |
| Max Supply Current | 32mA |
| Output Characteristics | 3-STATE |
| Input | Clock |
| Ratio - Input:Output | 1:5 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Height | 1.48mm |
| Length | 4.98mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY2305SXC-1T Datasheet
+8613715157867