CY7B994V-2AXCT OverviewClock ICs are packaged using the Tape & Reel (TR) method. In the 100-LQFP package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. There are a total of 100 terminations in this file. A voltage of 3.3V should be applied to this electronic frequency generator. In this case, LVPECL, LVTTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 200MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 3.63V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.97V is recommended for safety reasons. There are 2.97V~3.63V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. There are several logic levels in LVTTL logic that can be used with this clock generator. It is possible to classify this electronic component as a Clock Buffer, Fanout Distribution. An IC that generates clocks specifically for microprocessors, this clock PLL is 100-bits in si100e. The related electrical components for the base part number CY7B994 can be found below. A 100 pin is available on the clock PLL. Clock PLL is capable of handling a voltage of 3.3V. With CONFIGURABLE AS SINGLE ENDED TTL ALSO, this clock generator produces better clock signals. It is part of the RoboClock™ series of electronic components. The output frequency is magnified as high as possible with 18 signal outputs. The timing skew of this frequency synthesizer is low at 0.8 nsmax. 7B-family clock generators are similar.
CY7B994V-2AXCT FeaturesAvailable in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2AXCT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B994V-2AXCT Clock Generators applications.
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Propagation Delay (tpd) | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-2AXCT Datasheet
+8613715157867