DAC5652IPFBR OverviewIn the 48-TQFP package, you will find it. In order to operate it, a voltage supply of 3.3V volts is required. Surface Mount-connectors can be used to attach this FPGA module to the development board. As far as the operating temperature is concerned, it should be kept within -40°C~85°C when operating. Unlike other FPGA models, this one is contained in Tape & Reel (TR) for the sake of space saving. 48 terminations are present in total. You can find related parts by using the part number DAC5652, which is its base part number. In order to make it work, 48 pins have been designed. Its flexibility is fully utili3.3Ved when operated with a supply voltage of 3.3V. With a total of 48 pins, it is equipped with a high level of security. It can accept a maximum voltage of 3.6V volts as a supply voltage. A minimal supply voltage of 3V is required for it to operate.
DAC5652IPFBR Features48-TQFP package
48 pin count
48 pins
DAC5652IPFBR ApplicationsThere are a lot of Texas Instruments
DAC5652IPFBR Digital to Analog Converters (DAC) applications.
Data Acquisition Systems
Calibration
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 137.410139mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| Max Power Dissipation | 360mW |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DAC5652 |
| Pin Count | 48 |
| Output Type | Current - Unbuffered |
| Operating Supply Voltage | 3.3V |
| Polarity | Unipolar |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 75mA |
| Number of Bits | 10 |
| Architecture | Current Source |
| Converter Type | D/A CONVERTER |
| Supply Type | Analog, Digital |
| Reference Type | External, Internal |
| Data Interface | Parallel |
| Differential Output | Yes |
| Resolution | 1.25 B |
| Sampling Rate | 200 Msps |
| Voltage - Supply, Analog | 3V~3.6V |
| Voltage - Supply, Digital | 3V~3.6V |
| Settling Time | 20ns (Typ) |
| Power Consumption | 290mW |
| Linearity Error-Max (EL) | 0.0977% |
| Integral Nonlinearity (INL) | 1 LSB |
| Input Bit Code | OFFSET BINARY |
| Number of Converters | 2 |
| Conversion Rate | 200 Msps |
| INL/DNL (LSB) | ±0.25, ±0.16 |
| Signal to Noise Ratio (SNR) | 63 dB |
| Differential Nonlinearity | 0.5 LSB |
| Analog Output Voltage-Min | -1V |
| Spurious-free dynamic range (SFDR) | 80 dB |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DAC5652IPFBR Datasheet
+8613715157867