DAC7744EB OverviewA 48-BSSOP (0.295, 7.50mm Width) package is provided with this component. An electrical supply voltage of 15V powers it. An FPGA module can be attached to a development board with a Surface Mount-pin. During the operation of the system, the operating temperature should remain within the range of -40°C~85°C. It is for space saving reasons that this FPGA model is contained in Tube. As a whole, it has 48 terminations. Related parts can be found by using its base part number DAC7744. 48 pins are designed into the device. A 15V-volt supply allows designers to fully utili15Ve its flexibility. In addition to this, it has 48 pins. A maximum voltage of 15.75V can be supplied to it. As long as the supply voltage is at least 4.75V, it is able to work properly.
DAC7744EB Features48-BSSOP (0.295, 7.50mm Width) package
48 pin count
48 pins
DAC7744EB ApplicationsThere are a lot of Texas Instruments
DAC7744EB Digital to Analog Converters (DAC) applications.
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.635mm |
| Base Part Number | DAC7744 |
| Pin Count | 48 |
| Output Type | Voltage - Buffered |
| Operating Supply Voltage | 15V |
| Polarity | Bipolar, Unipolar |
| Max Supply Voltage | 15.75V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 16 |
| Architecture | R-2R |
| Converter Type | D/A CONVERTER |
| Supply Type | Dual |
| Reference Type | External |
| Data Interface | Parallel |
| Differential Output | No |
| Resolution | 2 B |
| Sampling Rate | 100 ksps |
| Voltage - Supply, Analog | ±14.25V~15.75V |
| Voltage - Supply, Digital | 5V |
| Settling Time | 11μs |
| Power Consumption | 50mW |
| Integral Nonlinearity (INL) | 3 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 4 |
| Conversion Rate | 100 ksps |
| INL/DNL (LSB) | ±4 (Max), ±2 (Max) |
| Negative Supply Voltage-Nom | -15V |
| Analog Output Voltage-Max | 10V |
| Differential Nonlinearity | 2 LSB |
| Analog Output Voltage-Min | -10V |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867