DAC8512FPZ OverviewA 8-DIP (0.300, 7.62mm) package is provided with this component. An electrical supply voltage of 5V powers it. An FPGA module can be attached to a development board with a Through Hole-pin. During the operation of the system, the operating temperature should remain within the range of -40°C~85°C. It is for space saving reasons that this FPGA model is contained in Tube. As a whole, it has 8 terminations. Related parts can be found by using its base part number DAC8512. 8 pins are designed into the device. A 5V-volt supply allows designers to fully utili5Ve its flexibility. In addition to this, it has 8 pins. A maximum voltage of 5.25V can be supplied to it. As long as the supply voltage is at least 4.75V, it is able to work properly.
DAC8512FPZ Features8-DIP (0.300, 7.62mm) package
8 pin count
8 pins
DAC8512FPZ ApplicationsThere are a lot of Analog Devices Inc.
DAC8512FPZ Digital to Analog Converters (DAC) applications.
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
Mobile Communications
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | DAC8512 |
| Pin Count | 8 |
| Output Type | Voltage - Buffered |
| Operating Supply Voltage | 5V |
| Polarity | Unipolar |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation | 2.5mW |
| Number of Bits | 12 |
| Max Output Voltage | 4.087V |
| Architecture | R-2R |
| Converter Type | D/A CONVERTER |
| Reference Type | Internal |
| Data Interface | SPI, DSP |
| Differential Output | No |
| Resolution | 1.5 B |
| Sampling Rate | 62.5 ksps |
| Voltage - Supply, Analog | 5V |
| Min Output Voltage | 4.103V |
| Settling Time | 16μs (Typ) |
| Integral Nonlinearity (INL) | 2 LSB |
| Input Bit Code | COMPLEMENTARY OFFSET BINARY |
| Number of Converters | 1 |
| Conversion Rate | 62.5 ksps |
| INL/DNL (LSB) | ±0.75, ±0.75 |
| Height | 3.43mm |
| Length | 9.27mm |
| Width | 7.24mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
DAC8512FPZ Datasheet
+8613715157867