DC-ME-01T-C-10,Digi DC-ME-01T-C-10 price,Integrated Circuits (ICs) DC-ME-01T-C-10 Distributor,DC-ME-01T-C-10 supplier
DC-ME-01T-C-10,Digi DC-ME-01T-C-10 price,Integrated Circuits (ICs) DC-ME-01T-C-10 Distributor,DC-ME-01T-C-10 supplier
DC-ME-01T-C-10
The picture is for reference only, please refer to the product specification
DC-ME-01T-C-10
    Part Number:KY-DC-ME-01T-C-10
    Mfr. Part No:DC-ME-01T-C-10
    Mfr.:Digi
    Stock:8287
    Description: MPU Core ARM7TDMI, NS7520 1.45 x 0.75 36.7mmx19.1mm -40°C~85°C 2MB RJ45 Digi Connect ME® 8MB 55MHz 55MHz
    Data Sheet:DC-ME-01T-C-10 Datasheet
Add to cart
In Stock: 8287
    +
  • *
  • Please send your requirements to E-mail:sales@kywos.com,we will reply you as soon as possible
  • Inquiry
  • Products Details
  • DC-ME-01T-C-10 Overview
    The microcontroller has been classified as a MPU Core type module or board.An integral MCU electronics of it is a processor with ARM7TDMI, NS7520 cores that drives the whole thing.It is important to note that the microcontroller is set to -40°C~85°C as the default setting.A MCU electronics's flash size is measured by the letter 2MB.Connectors of type RJ45 are the most common.A member of the Digi Connect ME® Series, this MCUs can be found in this category.A RAM size of 8MB is set in order to ensure that the software runs normally and that MCU chip does not crash.There is a 55MHz speed for this MCU chip.In order for microprocessor to continue to function accurately, microprocessor must continue to operate exactly at 55MHz frequency as long as microprocessor remains accurate.In addmicroprocessorion to that, microprocessor is packaged wmicroprocessorh Module.At the time of this microprocessor, the maximum operating temperature is 85°C.As far as the temperature is concerned, microprocessor should be warmer than -40°C when microprocessor is operating.Program ARM relies on a proprietary architecture called ARM.There is a 3.3V volt supply that powers this microcontrollers, which is used as its operating voltage.In this case, the value chosen for data storage is FLASH, NOR, SDRAM.It is important to note that the MCUs supply current is set to 270mA.
    DC-ME-01T-C-10 Features
    Core processor of ARM7TDMI, NS7520
    Flash size of 2MB
    Speed of 55MHz
    Core architecture of ARM

    DC-ME-01T-C-10 Applications
    There are a lot of Digi
    DC-ME-01T-C-10 Microcontroller, Microprocessor, FPGA Modules applications.

    Process Monitoring
    Healthcare Monitoring
    Patient Monitoring
    IoT Secure Gateways
    Human Machine Interface
    Human Machine Control Panel
    Home and Building Automation
    Thermostat
    Industrial Gateways
    Embedded Instrumentation
    Factory Lead Time2 Weeks
    Package / CaseModule
    Operating Temperature-40°C~85°C
    SeriesDigi Connect ME®
    Published2006
    Size / Dimension1.45 x 0.75 36.7mmx19.1mm
    Part StatusDiscontinued
    Moisture Sensitivity Level (MSL)1 (Unlimited)
    Connector TypeRJ45
    Max Operating Temperature85°C
    Min Operating Temperature-40°C
    Frequency55MHz
    Operating Supply Voltage3.3V
    InterfaceEthernet, Serial
    Operating Supply Current270mA
    Nominal Supply Current250mA
    Speed55MHz
    RAM Size8MB
    Memory TypeFLASH, NOR, SDRAM
    Core ProcessorARM7TDMI, NS7520
    Data Rate230 kbps
    Density15.3 Mb
    Core ArchitectureARM
    Power Consumption891mW
    Module/Board TypeMPU Core
    Flash Size2MB
    Height18.7mm
    Length36.7mm
    Width19.1mm
    RoHS StatusRoHS Compliant
    Lead FreeLead Free
    
    Sign up for new products, exclusive offers, discounts information
    /productsshow/dc_me_01t_c_10.html
    productsshow.php
    Submit successfully
    5 close the page
    Fill in inquiry informationX
  • 0
  • KywosCici
  • sales@kywos.com
  • +8613715157867
  • Top