FS-355 Overview
The module or board type of the microcontroller is MPU Core.Microprocessor chip is driven by a processor with ARM7TDMI, NS7520 cores.0°C~70°C is the default setting for the microcontroller.The MCU electronics's size of flash is 2MB.48-DIP is the connector type.To ensure that the software runs normally, the RAM size is reduced to 16MB.The MCU chip operates in 55MHz speed.MCU chip can continue to function accurately at 55MHz frequency.Microprocessor has Module package.The maximum operational temperature at this time is 70°C.When operating, microprocessor should be warmer than 0°C.The architecture that micro controller's core adopts is ARM.Voltage of the operating supply this microcontrollers operates with a 3.3V volt supply.The chosen value for data storage is FLASH, RAM.The microchips embed a memory of 16MB that can be used to store data and programs.
FS-355 Features
Core processor of ARM7TDMI, NS7520
Flash size of 2MB
Speed of 55MHz
Core architecture of ARM

FS-355 Applications
There are a lot of Digi
FS-355 Microcontroller, Microprocessor, FPGA Modules applications.

Industrial Automation
Industrial Instrumentation
Embedded Control Processing
Embedded User Interfaces
Test and Measurement
Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring

Package / Case	Module
Operating Temperature	0°C~70°C
Published	2012
Size / Dimension	2.48 x 0.73 62.9mmx18.5mm
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	48-DIP
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Frequency	55MHz
Operating Supply Voltage	3.3V
Interface	Ethernet, GPIO, I2C, SPI, UART
Memory Size	16MB
Speed	55MHz
RAM Size	16MB
Memory Type	FLASH, RAM
Core Processor	ARM7TDMI, NS7520
Data Rate	100 kbps
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	2MB
Height	10.4mm
Length	62.9mm
Width	18.5mm
RoHS Status	RoHS Compliant
Lead Free	Contains Lead