HMC826LP6CE OverviewThe Strip method is used for packaging clock ICs. As part of the 40-VQFN Exposed Pad package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 40 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, Clock is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 1.1GHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In order to maintain safety, this frequency generator should be supplied with voltages above 3V. In terms of supply voltage, RF synthesizer works with 3V~5.2V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. It is a 40-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number HMC826. There are 40 pins on the frequency generators that are available for use. Supply voltage 5V is what clock generator can handle. There is a IT ALSO OPERATES WITH 4.8V-5.2V SUPPLY feature on this frequency generator in order to produce a better clock signal. In order for it to fully perform time clock generator's functions, it needs a supply current of 56mA. As an analog IC, this RF synthesizer falls under the PHASE LOCKED LOOP-device category.
HMC826LP6CE FeaturesAvailable in the 40-VQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 5V
HMC826LP6CE ApplicationsThere are a lot of Analog Devices Inc.
HMC826LP6CE Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 117.310327mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Strip |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | IT ALSO OPERATES WITH 4.8V-5.2V SUPPLY |
| Voltage - Supply | 3V~5.2V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | HMC826 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Analog IC - Other Type | PHASE LOCKED LOOP |
| Operating Supply Current | 56mA |
| Frequency (Max) | 1.1GHz |
| Input | Clock |
| Ratio - Input:Output | 1:1 |
| PLL | Yes |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Length | 6mm |
| Height Seated (Max) | 0.9mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
HMC826LP6CE Datasheet
+8613715157867