ICM7556ISD+ Overview14-SOIC (0.154, 3.90mm Width) comes in a package with the timer clock. [0] is the frequency of the programmable timer.It is used to pack in Tube case. There is no recommended mounting type other than Surface Mount.It is possible to supply a voltage of 2V~16.5V to the programmable timer.The type of chips can be divided into 555 Type, Timer/Oscillator (Dual). The operating temperature of this timer clock is -20°C~85°C. To mount this digital timer with Surface Mount. The operating supply voltage is rated at 60μA voltage. It is based on ICM7556. The timer clock contains 14 pins. The supply voltage of the programmable timer can rate 5V. The sum of the IC chip pins is 14 . The number of the chip's terminations sums up to 14. The timer clock runs quiescent current at 600μA. The number of Timers/Counters on the device is 2.
ICM7556ISD+ FeaturesOperate frequency at 500kHz
Package / Case: Tube
Mounting Type:Surface Mount
Quiescent Current at 600μA
2 Timers/Counters
ICM7556ISD+ ApplicationsThere are a lot of Maxim Integrated
ICM7556ISD+ Programmable Timers & Oscillators applications.
Tamper Detection
Home Automation Sensors
Thermostats
Consumer Electronics
Remote Sensors
White Goods
Electric Vehicles
Always On Systems
Clutch Actuator circuit
Car Door Handle circuit
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -20°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | 555 Type, Timer/Oscillator (Dual) |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 300mW |
| Voltage - Supply | 2V~16.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ICM7556 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 18V |
| Power Supplies | 5/15V |
| Supply Voltage-Min (Vsup) | 2V |
| Operating Supply Current | 60μA |
| Propagation Delay | 75 ns |
| Quiescent Current | 600μA |
| Number of Timers/Counters | 2 |
| Supply Current-Max (Isup) | 0.6mA |
| High Level Output Current | -2mA |
| Low Level Output Current | 3.2mA |
| Height | 1.55mm |
| Length | 8.75mm |
| Width | 5.2mm |
| REACH SVHC | Unknown |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ICM7556ISD+ Datasheet
+8613715157867