IDT5V993A-2QG Overview
As a clock IC, it is packaged by the Tube method. The 28-SSOP (0.154, 3.90mm Width) package embeds this Clock PLL. There is a Clock PLL called LVTTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 85MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. As far as this electronic part is concerned, it can be classified as a PLL Clock Driver component. The related electronic parts of part number IDT5V993A are listed below. There is an electronic part in this series that belongs to the TurboClock™ family.
IDT5V993A-2QG Features
Available in the 28-SSOP (0.154, 3.90mm Width)

IDT5V993A-2QG Applications
There are a lot of Renesas Electronics America Inc.
IDT5V993A-2QG Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Mounting Type	Surface Mount
Package / Case	28-SSOP (0.154, 3.90mm Width)
Operating Temperature	0°C~70°C
Packaging	Tube
Series	TurboClock™
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	PLL Clock Driver
Voltage - Supply	3V~3.6V
Base Part Number	IDT5V993A
Number of Circuits	1
Frequency (Max)	85MHz
Input	LVTTL
Ratio - Input:Output	1:8
PLL	Yes with Bypass
Differential - Input:Output	No/No
Divider/Multiplier	Yes/Yes