INA2126UA/2K5 OverviewThe linear amplifier is packaged in a 16-SOIC (0.154, 3.90mm Width) case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. Buffer amplifier has a total of 16 pins. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 16 pins. Regarding input offset voltage, op amp rates 500μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 175μA. The voltage gain should stay at 80dB. There are 2 circuits on this op amp. According to the specifications of the buffer op amp, the operating supply voltage is rated at 4. TR is adopted to pack the instrumentation amplifier. Buffer amplifier has a quiescent current of 175μA. Instrumentation amplifier resistance should remain within the range of 1GOhm.
INA2126UA/2K5 Features16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA2126UA/2K5 ApplicationsThere are a lot of Texas Instruments
INA2126UA/2K5 Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | INA2126 |
| Pin Count | 16 |
| Number of Elements | 4 |
| Number of Circuits | 2 |
| Operating Supply Current | 175μA |
| Nominal Supply Current | 400μA |
| Quiescent Current | 175μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 200 kHz |
| Gain Bandwidth Product | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 150μV |
| -3db Bandwidth | 0.2MHz |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -18V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Voltage Gain-Nom | 100 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867