IRS2053MTRPBF Overview
The book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A 48-VFQFN Exposed Pad case has been embedded with it. I have a device with 3 channels attached to it. In this part, you will find Line Driver functions that you may find useful. In addition to being used in Pre-Amplifier, the device can be used in Y as well. Votage is supplied within the specified time frame. -40°C~125°C TA is the range of temperature for this device. This chip has 48 terminations, which means it has 48 terminations on it. The IRS2053MPBF family of parts can be found by searching for a part number that is similar to it. In order to better understand the specifications of the device, please refer to the following details: Class D. As far as the 48 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using AUDIO AMPLIFIER. It is important that the minimum supply voltage (Vsup) for this part is greater than 10V. The voltage can be given at 1012V volts. In order to mount it, Surface Mount is required. When a 215V-voltage supply is applied, the chip conducts. If the voltage gain is to stay at 60 dB, it should be set to 60 dB. It is important to know that there is a 20 kHz bandwidth for data transfer.
IRS2053MTRPBF Features
With 48-VFQFN Exposed Pad channels
operate temperature at the range of -40°C~125°C TA
consumer IC type: AUDIO AMPLIFIER

IRS2053MTRPBF Applications
There are a lot of Infineon Technologies
IRS2053MTRPBF Audio Special Purpose applications.

Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors
Telecom Systems
Hi-Fi Equipment

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-VFQFN Exposed Pad
Number of Pins	48
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	48
ECCN Code	EAR99
Terminal Finish	MATTE TIN
Applications	Pre-Amplifier
Voltage - Supply	10V~15V
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	IRS2053MPBF
Function	Line Driver
Qualification Status	Not Qualified
Operating Supply Voltage	215V
Power Supplies	1012V
Supply Voltage-Min (Vsup)	10V
Number of Channels	3
Interface	Analog
Output Power	6.2W
Common Mode Rejection Ratio	60 dB
Bandwidth	20 kHz
Specifications	Class D
Gain	60 dB
Consumer IC Type	AUDIO AMPLIFIER
Length	7mm
Height Seated (Max)	1.05mm
Width	7mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free