LICAL-ENC-LS001 Overview
Package 8-DIP (0.300, 7.62mm) contains the embedded encoder.In order to keep the encoder safe, it is recommended that you pack it in a Tube case.Through Hole-axis is mounted on this motor encoder.As a type, it falls under the Data Encoder category.The encoder connected in Remote Control is suitable for this connector.A 8 termination is available on the optical encoder.2.0V~5.5V can apply analog supply voltage.Through Hole mounts it on the wall.Encoders like this have 8 pins.In order for the encoder reader to run in a stable manner, the maximum 85°C must be set.In order for this rotary encoder to work properly, its minimum operating temperature must exceed -40°C.The rotary encoder is capable of working with a minimum supply voltage of 2V.A maximum voltage of 5.5V can be applied across the converter as the supply voltage.There is an electrical quadrature encode included in the LS series.
LICAL-ENC-LS001 Features
In 8-DIP (0.300, 7.62mm) package
Mounting Type: Through Hole
8 pins

LICAL-ENC-LS001 Applications
There are a lot of Linx Technologies Inc.
LICAL-ENC-LS001 Encoders, Decoders, Converters applications.

Car Alarms
Car Starters
Home Automation
Industrial Automation
Remote Status Monitoring
Lighting Control
Low-voltage operation
Extended temperature range
Low power consumption
UART Interfacing

Factory Lead Time	3 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Packaging	Tube
Series	LS
Published	2004
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Data Encoder
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Applications	Remote Control
Terminal Position	DUAL
Terminal Pitch	2.54mm
Reach Compliance Code	unknown
Qualification Status	Not Qualified
Power Supplies	2.5/5V
Temperature Grade	AUTOMOTIVE
Max Supply Voltage	5.5V
Min Supply Voltage	2V
Nominal Supply Current	340μA
Voltage - Supply, Analog	2.0V~5.5V
RoHS Status	RoHS Compliant