LM13700MX/NOPB OverviewA 16-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Transconductance-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 300μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 2.6mA volt supply current is needed for this linear amplifier to operate. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Push-Pull signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 18V. The instrumentation amplifier is packed in the form of TR.
LM13700MX/NOPB Features16 Pins
supply voltage of 15V
Output Type: Push-Pull
LM13700MX/NOPB ApplicationsThere are a lot of Texas Instruments
LM13700MX/NOPB Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | LM13700 |
| Pin Count | 16 |
| Output Type | Push-Pull |
| Operating Supply Voltage | 18V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 2.6mA |
| Nominal Supply Current | 2.6mA |
| Output Current | 20mA |
| Slew Rate | 50V/μs |
| Amplifier Type | Transconductance |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 1μA |
| Voltage - Supply, Single/Dual (±) | 10V~36V ±5V~18V |
| Output Current per Channel | 500μA |
| Input Offset Voltage (Vos) | 300μV |
| Bandwidth | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2000 kHz |
| Average Bias Current-Max (IIB) | 5μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 8μA |
| Programmable Power | YES |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.6μA |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867