LMV824Q1MTX/NOPB OverviewIn order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.7V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1mA and 10 . Maintain 105dB as the voltage gain. In total, there are 4 circuits on this buffer amplifier. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a result of this, the buffer amplifier is packed in TR. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
LMV824Q1MTX/NOPB Features14 Pins
supply voltage of 2.7V
105dB voltage gain
Output Type: Rail-to-Rail
LMV824Q1MTX/NOPB ApplicationsThere are a lot of Texas Instruments
LMV824Q1MTX/NOPB Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMV824 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Power Supplies | 2.5/5V |
| Number of Circuits | 4 |
| Operating Supply Current | 1mA |
| Supply Current-Max | 0.35mA |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 40nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 45mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 5.6MHz |
| Unity Gain BW-Nom | 5600 kHz |
| Voltage Gain | 105dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.1μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.03μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LMV824Q1MTX/NOPB Datasheet
+8613715157867