MAX5450EUB+T Overview
This file is contained in a package of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Volatile starts the process of storing this pentometer.This digital potentiometer has 2 embedded circuits.For securing digital analogics, it is available in the Tape & Reel (TR) package.During overcurrent, this pentometer features 256 taps.Positions are 256.The terminations are set at 10.To provide you with some reference, this programmable potentiometer includes 2 functions.As shown, the speed potentiometers's resistance will be 10000Ohm.Performance is delivered by 5V power.The digi devices shows the 10 pins.The mount should be done in the direction of Surface Mount.It is possible to supply 2.7V~5.5V volts to the potentionmeter.A digital potentiometer has a temperature range of -40°C~85°C.In this case, the flow can be limited by 10kOhm.MAX5450 family member.The potentiameter has 10 pins.Converter type DIGITAL POTENTIOMETER can be used to classify it.A potentiometer conducts at a 5V supply voltage.
MAX5450EUB+T Features
Available in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~85°C
10 pins
Operate supply voltage at the range of 5V

MAX5450EUB+T Applications
There are a lot of Maxim Integrated
MAX5450EUB+T Digital Potentiometers applications.

Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
Adjust VCOM settings

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Temperature Coefficient	35 ppm/°C
Resistance	10kOhm
Number of Positions	256
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Voltage - Supply	2.7V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	MAX5450
Pin Count	10
Operating Supply Voltage	5V
Configuration	Rheostat
Interface	Up/Down (U/D, INC, CS)
Number of Circuits	2
Nominal Supply Current	700nA
Memory Type	Volatile
Converter Type	DIGITAL POTENTIOMETER
Taper	Linear
Number of Taps	256
Total Resistance	10000Ohm
Resistance - Wiper (Ω) (Typ)	225
Resistor Terminal Voltage-Max	5V
Length	3mm
Height Seated (Max)	1.1mm
Width	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant