MC33078DT OverviewPackaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Cut Tape (CT) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~105°C . As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. 100dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 15V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
MC33078DT Features8 Pins
supply voltage of 15V
100dB voltage gain
MC33078DT ApplicationsThere are a lot of STMicroelectronics
MC33078DT Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 4.535924g |
| Operating Temperature | -40°C~105°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Max Power Dissipation | 500mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MC3307 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 5mA |
| Power Dissipation | 500mW |
| Output Current | 37mA |
| Max Supply Current | 5mA |
| Slew Rate | 7V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 5V~30V ±2.5V~15V |
| Output Current per Channel | 37mA |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 15000 kHz |
| Voltage Gain | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Bias Current-Max (IIB) @25C | 0.75μA |
| Dual Supply Voltage | 9V |
| Height | 1.25mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC33078DT Datasheet
+8613715157867