NB2304AI1HDG OverviewTube-method packaging is used for clock ICs. The 8-SOIC (0.154, 3.90mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 8 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be CMOS. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 133.3MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.6V. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. This electronic component is usually classified as a Zero Delay Buffer component. The clock-generating IC is a 8-bit device designed specifically for microprocessors. You can find related electrical components to the base part number NB2304A. It is possible to connect to the frequency generators via 8 pins. There is a maximum supply voltage of 3.3V that clock generator can handle. At 0.2 ns Max, this clock generator offers low timing skew. 4 high true output enable pins are available on this clock generator.
NB2304AI1HDG FeaturesAvailable in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
4 true outputs
NB2304AI1HDG ApplicationsThere are a lot of ON Semiconductor
NB2304AI1HDG Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Zero Delay Buffer |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NB2304A |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Nominal Supply Current | 45mA |
| Frequency (Max) | 133.3MHz |
| Halogen Free | Halogen Free |
| Input | CMOS |
| Ratio - Input:Output | 1:4 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Same Edge Skew-Max (tskwd) | 0.2 ns |
| Number of True Outputs | 4 |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NB2304AI1HDG Datasheet
+8613715157867