NB2870ASNR2 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the SOT-23-6 Thin, TSOT-23-6 package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 235. 6 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. CMOS, Crystal is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 30MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL works with 2.375V~3.6V supply voltage provided. The ambient temperature should be set at 0°C~70°C, which is estimated by the test statistics. This is a clock generator compatible with CMOS logic levels. This electronic component can be classified as a Clock/Frequency Synthesizer. This clock-generating IC is a 6-bit device designed explicitly for microprocessors. According to the base part number NB2870A, its related parts can be found. There is an available 6 pin on the clock generators.
NB2870ASNR2 Features
Available in the SOT-23-6 Thin, TSOT-23-6
Supply voltage of 3.3V

NB2870ASNR2 Applications
There are a lot of ON Semiconductor
NB2870ASNR2 Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Lifecycle Status	OBSOLETE (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6 Thin, TSOT-23-6
Number of Pins	6
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Type	Clock/Frequency Synthesizer
Terminal Finish	Tin/Lead (Sn80Pb20)
Voltage - Supply	2.375V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	235
Supply Voltage	3.3V
Terminal Pitch	0.95mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	NB2870A
Output	CMOS
Pin Count	6
Qualification Status	Not Qualified
Power Supplies	2.5/3.3V
Number of Circuits	1
Frequency (Max)	30MHz
Input	CMOS, Crystal
Ratio - Input:Output	1:2
Primary Clock/Crystal Frequency-Nom	30MHz
PLL	Yes
Differential - Input:Output	No/No
Divider/Multiplier	Yes/No
Length	3mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead