SC68C2550BIB48,128 Overview
There is a cost-effective 48-LQFP package available for this product.The transmission of data takes place over 2, DUART channels.For packaging purposes, Tape & Reel (TR) is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 48 terminations.For its operation, it requires a supply voltage of 3.3V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 2.5V 3.3V 5V.Electronic devices such as this are known as 48-pin integrated circuits.There is 80MHz clock frequency measured on this IC.There are some characteristics of Timer/Counter that it possesses.85°C is the maximum temperature that it can operate at.When power supplies are provided of 2.5/5V, it is reliable and efficient for electronic designers.Furthermore, it has the ability to perform ALSO OPERATES AT 2.5V OR 5V SUPPLY as well.Basically, it uses SC68C2550B as its base part number.A minimum of -40°C is required for operation.
SC68C2550BIB48,128 Features
2 serial I/Os
Clock frequency of 80MHz
Power supplies of 2.5/5V
ALSO OPERATES AT 2.5V OR 5V SUPPLY

SC68C2550BIB48,128 Applications
There are a lot of NXP USA Inc.
SC68C2550BIB48,128 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Mounting Type	Surface Mount
Package / Case	48-LQFP
Surface Mount	YES
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Feature	Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	48
Terminal Finish	TIN
Additional Feature	ALSO OPERATES AT 2.5V OR 5V SUPPLY
HTS Code	8542.31.00.01
Voltage - Supply	2.5V 3.3V 5V
Terminal Position	QUAD
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SC68C2550B
Pin Count	48
JESD-30 Code	S-PQFP-G48
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Power Supplies	2.5/5V
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	80MHz
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	8
Data Rate (Max)	5Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.625 MBps
Communication Protocol	ASYNC, BIT
FIFO's	16 Byte
With Modem Control	Yes
Length	7mm
Height Seated (Max)	1.6mm
Width	7mm
RoHS Status	ROHS3 Compliant